Panasonic KX-TG2344C Operating Instructions Manual Download Page 32

Page: 32 / 80

Using the Caller List

What “

” means

“

” indicates that you have already viewed this calling

information or answered the call. If the same caller calls
again, the call entry with the “

” will be replaced with the

new call entry.

If a caller calls more than once

The number of times the same caller called is displayed
(“

” to “

”). The date and time of the most recent call will

be recorded. After viewing a caller’s information, “

” to

“

” will be replaced with “

”.

Calling Back from the Caller List

• In some cases, you may have to edit the number before dialing (p. 33).

(e.g. You may have to add “1” for long distance calls.)

• If a phone number is not displayed in the caller information, you cannot call that

caller back from the Caller List.

Press

Rcvd calls

[

]

, or

[

]

to enter the Caller List.

Scroll to the desired caller by pressing

[

]

[

]

Press

[

]

[

]

• The phone number is dialed.

SMITH,JACK

3:10P JUN.29

TURNER,CINDY

11:20A JUN.12

e.g. Called 2 times.

Handset

PQQX14041ZA.book 32 ページ２００４年２月２０日　金曜日　午後３時３分

Summary of Contents for KX-TG2344C

















































































Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands

Panasonic KX-TG2344C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands