Panasonic KX-TG2344C Operating Instructions Manual Download

Page: 3 / 80

For Best Performance

Battery Charge

The handset is powered by a rechargeable Nickel-
Metal Hydride (Ni-MH) battery. Charge the battery
for

6 hours

before initial use (p. 10).

Base Unit Location/Noise

Calls are transmitted between the base unit and handset using wireless radio
waves.

For maximum distance and noise-free operation,

the recommended

base unit location is:

Note:

• If you use the handset near a microwave oven which is being used, noise may be

heard from the receiver or the speaker. Move away from the microwave oven and
closer to the base unit.

• If you use the handset near another cordless phone’s base unit, noise may be

heard. Move away from the other cordless phone’s base unit and closer to your
base unit.

Raise the antenna.

Away from electrical appliances such
as a TV, personal computer or another
cordless phone.

In a HIGH and CENTRAL location
with no obstructions such as walls.

PQQX14041ZA.book 3 ページ２００４年２月２０日　金曜日　午後３時３分

Summary of Contents for KX-TG2344C

















































































Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands

Panasonic KX-TG2344C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands