Panasonic KX-TG2344C Operating Instructions Manual Download Page 29

Page: 29 / 80

elephone System

Answering Calls

When a call is received, the unit rings, “

Incoming call

” is displayed, and the

Ringer/Message Alert indicator on the handset and “

” on the base unit

flash rapidly. If you subscribe to a Call Display service, see page 30.

Auto Talk

If the Auto Talk feature is turned on (p. 17), you can answer a call by simply lifting
the handset off the base unit or charger.

Temporary ringer off

You can turn the ringer off temporarily by pressing

[OFF]

, while the handset is

ringing for an outside call. The handset will ring again as usual the next time a call is
received.

Press

[

]

[

]

• You can also answer a call by

pressing any buttons except

[

]

[

]

[OFF]

To hang up, press

[OFF]

or place

the handset on the base unit or
charger.

• To transfer the call to another person, see page 45.

• If the ringer volume is turned off, the unit will not ring (p. 18).

LINE

IN USE

[

]

[OFF]

[

]

Ringer/Message Alert
Indicator

PQQX14041ZA.book 29 ページ２００４年２月２０日　金曜日　午後３時３分

Summary of Contents for KX-TG2344C

















































































Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands

Panasonic KX-TG2344C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands