Panasonic KX-TG2344C Operating Instructions Manual Download

Page: 31 / 80

lephone System

Using the Caller List

The unit can record information for up to 30 different callers and store this
information in the Caller List. Caller information is sorted by the most recent call to
the oldest. When the 31

call is received, the information from the 1

call is deleted.

The unit will also tell you how many calls you missed while you were out or
unavailable to answer the phone.

• When new messages have been recorded (p. 57), “

New message

” will be

displayed in place of missed calls display.

Viewing the Caller List

• If there is no name information for a caller and you do not store the name and

phone number in the phone book, the display will only show the phone number.

• Each handset has its own Caller List. If you viewed the Caller List or answered a

call on one handset, the same information in the other handset will be displayed
as “

missed

”.

• If you do not press any buttons for 60 seconds, the unit will exit the Caller List.

The display will show the number of calls
you missed.

Press

Rcvd calls

to review other calls

logged in the Caller List.
• If there are no items in the Caller List,

“

Rcvd calls

” will not be displayed.

• After viewing the missed call entries,

“

missed calls

” will disappear from the

display.

Press

Rcvd calls

[

]

, or

[

]

to enter the

Caller List.

To search from the most recent call, press

[

]

To search from the oldest call, press

[

]

• The caller’s name, number and the time and date

of the call are displayed. Name and phone number
are alternately displayed as shown on the right.

Press

[OFF]

to exit the list.

2 missed calls

Rcvd Phone

calls book

Handset off the base unit or
charger

Handset on the base unit or
charger

[1]

2 missed calls

Charging

Handset

2 missed calls

Rcvd

Phone

calls

book

2 missed calls

=Scroll

list

All erase

e.g. 2 calls missed.

Example

SMITH,JACK

3:10P JUN.29

Erase Select

555-333-4444

3:10P JUN.29

Erase Select

PQQX14041ZA.book 31 ページ２００４年２月２０日　金曜日　午後３時３分

Summary of Contents for KX-TG2344C

















































































Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands

Panasonic KX-TG2344C, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2344C

Reviews:

Related manuals for KX-TG2344C

Brands by name

Popular brands