NEC IPK II, User Manual

Page: 1 / 4

NEC IPK II NEC IPK II NEC IPK II NEC IPK II
Multi Multi Multi Multi- - - -line Telephone User Guide line Telephone User Guide line Telephone User Guide line Telephone User Guide
PLACING CALLS
PLACING CALLS PLACING CALLS
PLACING CALLS
Internal Calls Internal Calls Internal Calls Internal Calls
1. Lift the handset.
2. Dial a station number
Note 1:
Note 1: Note 1:
Note 1: When calling a multi-line telephone, dialing 1
1 1
1 after the station number will change ringing to voice or voice
to ringing.
Note 2: Note 2: Note 2: Note 2: To directly access a personal voice mailbox, dial 8 8 8 8 after dialing the station number.
6
Outside Calls
Outside Calls Outside Calls
Outside Calls
1. Lift the handset.
2. Typically dial 9 9 9 9 OR OR OR OR press an idle Outside Line Outside Line Outside Line Outside Line key.
3. Dial the telephone number.
Last Number Redial Last Number Redial Last Number Redial Last Number Redial
1. Without lifting the handset, press the Redial Redial Redial Redial key. The last dialed number is displayed.
2. To redial the last number, press #, speaker or lift handset. OR
OR OR
OR Search for the desired number from the Redial List
by pressing the Redial Soft
Redial Soft Redial Soft
Redial Soft-
- -
-key
key key
key or VOLUME UP
VOLUME UP VOLUME UP
VOLUME UP or VOLUME DOWN
VOLUME DOWN VOLUME DOWN
VOLUME DOWN keys. (Scroll through last 10 numbers dialed)
3. Lift the handset or press Speaker Speaker Speaker Speaker to place the call.
Station Speed Dial
Station Speed Dial Station Speed Dial
Station Speed Dial —
— —
— Programming
Programming Programming
Programming
To store
store store
store a Station Speed Dialing number (display telephones only):
1. Press the Speaker Speaker Speaker Speaker key.
2. Dial 755 755 755 755.
3. Dial the Station Speed Dial buffer number to be programmed (0~9).
Note: 0 = Station Speed Dial buffer 10
4. Dial the Access Code (e.g., 9) - if required.
5. Dial telephone number you want to store (up to 24 digits).
Note:
Note: Note:
Note: Valid entries are 0~9, # and *. To enter a pause, press MIC
MIC MIC
MIC. To store a Flash, press Recall
Recall Recall
Recall.
6. Press Hold Hold Hold Hold.
7. Enter the name associated with the Speed Dialing number (display telephones only):
# # = Accepts an entry (only required if two letters on the same key are needed - ex: TOM). Pressing # again =
Space. Conf Clears the character entry one character at a time (used when entering the Name). EXIT Clears all the
entries from the point of the flashing cursor and to the right (used when entering the Number, this clears both the
number and name).