Panasonic KX-TDA50, Features Manual

Page: 240 / 668

2.3 System Data Control
240 Feature Guide
Conditions
• The following are examples of feature number conflicts: 1 and 11, 0 and 00, 2 and 21, 10 and 101, 32
and 321, etc.
• Feature Additional number (Parameter)
Certain flexible feature numbers require additional digits to make the feature active. For example, to set
Call Waiting, the feature number for "Call Waiting" must be followed by "1" and to cancel it, the same
feature number should be followed by "0".
• Rotary single line telephone (SLT) users cannot dial feature numbers which include " " or "#".
• Portable station (PS) users cannot use the following features:
– Personal Speed Dialing
– OGM playback/record
– S-CO Line Access
– Parallel Telephone Mode set/cancel
– Walking Extension
– BGM set/cancel
– Timed Reminder
User Manual References
4.2.1 Feature Number Table
2.3.6 Floating Extension
Description
Virtual extension numbers can be assigned to resources to make them as easily accessible as extensions.
These numbers are referred to as "floating extension numbers" and can be assigned as a destination of
incoming calls, intercepted calls, etc.
This feature is also known as Floating Station.
Door Open 5
Resource Description
Device External Pager Used as the destination for the Trunk Answer From Any Station
(TAFAS) feature (
→
External Pager Floating Extension Number
[700]). (
→
1.15.3 Trunk Answer From Any Station (TAFAS))
Outgoing Message
(OGM) Used to play messages for callers via the Direct Inward System
Access (DISA) feature (
→
Outgoing Message (OGM) Floating
Extension Number [730]). (
→
1.15.6 Direct Inward System Access
(DISA))
Analog Remote
Maintenance Used to access PC programming mode through a modem on a PC
(
→
Modem Floating Extension Number [811]).
Feature Fixed Numbering