Panasonic KX-TDA50, Features Manual

Page: 123 / 668

1.15 Optional Device Features
Feature Guide 123
• Each OGM can be assigned a name to be used as a reference while programming. (
→
Outgoing
Message (OGM) Name [731])
• Account Code Entry (
→
1.5.4.3 Account Code Entry) can be used when making a CO line call via DISA.
Installation Manual References
2.5.3 MSG2 Card
Feature Guide References
1.1.1.4 Intercept Routing
1.1.1.5 Intercept Routing—No Destination
1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND)
2.2.5 Operator Features
User Manual References
1.2.7 Direct Inward System Access (DISA)
1.2.8 Remote Setting
1.15.7 Automatic Fax Transfer
Description
The PBX can distinguish between fax calls and other types of calls arriving on DISA lines, and automatically
transfer fax calls to preprogrammed destinations. When a call arrives on a DISA line, an OGM is played (
→
1.15.5 Outgoing Message (OGM)). At the same time, the PBX begins fax signal detection. If a fax signal is
detected, the PBX recognizes that the call is a fax call, and transfers the call to the fax destination assigned
to that OGM through system programming. This allows a single CO line to be used seamlessly for both voice
and fax calls, with only voice calls arriving at user extensions.
[Available Automatic Fax Transfer Destinations]
Destination Availability
Wired Extension
PS
*
ICD Group
PS Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog Remote Maintenance
Idle Line Access no. + Phone no.
CO Line Group Access no. + CO Line Group no. + Phone no.