Panasonic KX-TDA50, Features Manual

Page: 296 / 668

4.4 Tool
296 Feature Guide
4.4.6 Tool—System data Convert
Converts system data (DSSYS) files created with a previous version of the Maintenance Console for use
with the currently loaded version.
This option is only available when the Maintenance Console is in Initial mode.
It is necessary to convert system data to use it with a version of the Maintenance Console other than the
version that saved that data. This is because each new version of the Maintenance Console adds new
options and settings that are not saved by older versions.
Note
When upgrading from a system without an MEC card installed to a system with an MEC card installed,
after converting the system data using this utility, it is necessary to pre-install the MEC card by setting
Memory Expansion Card: on the 4.7.2 Slot [1-1] MPR Card Property screen to PreInstall .
To convert system data
1.
From the Tool menu, select System data Convert .
2.
In Source File Name , enter the file to convert.
• Enter the path and name of the file in the text field.
• Click the "…" button to navigate to and select the target file.
3.
In Destination File Name , enter the desired name for the converted file.
The destination file name or location must be different from the source file name.
If another file with the same name already exists in that location, it will be automatically overwritten.
• Enter the path and name of the file in the text field.
If you do not specify a path, the new file will be saved in the same directory as the source file.
• Click the "…" button to navigate to and select the target file.
4.
Click OK .
If the convert operation was successful, a message will be displayed.
5.
Click OK .