Panasonic KX-TDA50 Features Manual Download Page 121

Page: 121 / 668

1.15 Optional Device Features

Feature Guide

121

Is the correct

PIN entered?

Yes

Is the extension

busy (Call Waiting

mode on) and is

not in DND mode?

Yes

The call waits
to be received.

The extension
becomes idle.

Yes

The call is established.

The call is routed to the
intercept destination.
(DISA Intercept Routing
No Answer)

Does the destination

answer the call?

Does the

destination

answer

the call?

Yes

The call is established.

The call is disconnected.

OGM

Intercept Routing

Busy Tone

What method is assigned
for DISA Intercept
Routing Busy/DND?

The call is disconnected.

The call is routed to
the intercept destination.
(Intercept Routing Busy/DND)

The message for
the busy/DND mode
is sent to the caller.

Yes

Feature numbers are available only when the Walking COS feature is used.

Does the caller

press while hearing a busy

tone (Call Retry)?

Does the caller press

while hearing the reorder

tone (Call Retry)?

Does the caller press

while hearing a ringback

tone (Call Retry)?

Is the extension idle?

Is the Walking COS/Verified

Code Entry feature number dialed?

Yes

None

All Security

CO Line Security

Yes

Is the dialed number

an extension number or

floating extension number?

Yes

Extension No./
Floating
Extension No.

What is the dialed number?

Feature No.

(Absent Message,
FWD, etc.)

The feature is set.

CO Line Access No.
+ Telephone No.

Other

The dialed number is sent to the CO line.

Reorder tone

Yes

No Security

The call is disconnected.

Continued from previous page

The call is directed to the extension.
The caller hears a ringback tone.

(DISA Disconnect
Time after
Intercept expires)

(DISA Reorder
Tone time
expires)

(Busy Tone /
DND Tone
Continuation
time expires)

(DISA Intercept
time expires)

Summary of Contents for KX-TDA50





























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TDA50

Reviews:

Brands by name

Popular brands

Panasonic KX-TDA50, Features Manual

Search results

Summary of Contents for KX-TDA50

Reviews:

Brands by name

Popular brands