Panasonic KX-TDA50, Features Manual

Page: 180 / 668

1.24 Audible Tone Features
180 Feature Guide
1.24 Audible Tone Features
1.24.1 Dial Tone
Description
The following dial tones inform extension users about features activated on their extensions:
Each dial tone type has two frequencies, such as dial tone 1A and dial tone 1B.
Conditions
• Dial Tone Type A/B
Through system programming, it is possible to select dial tone type A or B for dial tones 1 through 4. If
"
Type A
" is selected, all dial tones 1 through 4 will become dial tone type A.
The dial tone type for ARS feature can be selected separately. If "
Type A
" is selected for ARS, dial
tone 1A will be heard. If "
Type B
" is selected, dial tone 1B will be heard.
• Distinctive Dial tone
Distinctive dial tone mode can be disabled. In this case, dial tone 1 will be heard.
• Dial Tone Patterns
All dial tone patterns have a default (
→
5.2.1 Tones/Ring Tones).
• Only dial tone 1 is sent to the extensions in a VM (DPT/DTMF) group. (
→
1.19.1 Voice Mail (VM) Group)
Type Description
Tone 1A/1B A normal dial tone is heard when:
a)
No features listed for dial tones 2 through 4 has been set, or
b)
Automatic Route Selection (ARS) is used.
Tone 2A/2B Heard when any one of the following features is set.
• Absent Message
• BGM
• Call Forwarding (FWD)
• Call Pickup Deny
• Call Waiting
• Do Not Disturb (DND)
• Extension Dial Lock
• Executive Busy Override Deny
• Hot Line
• Timed Reminder
Tone 3A/3B Heard while a called PS is being searched, or when any one of the following
features is performed.
• Account Code Entry
• Consultation Hold
• Answering a Timed Reminder call with no message
Tone 4A/4B Heard when messages are waiting for the extension.