Panasonic KX-TD500CE, Programming Manual

Page: 145 / 314

4.2 Trunk Line
Line 145
Parameter [TIE Line] Sending TIE Caller ID
Default No
Value Range 1.
No
2.
Yes
Description/Function Specifies whether to send or not the TIE Caller ID to the other end.
Reference • 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
Parameter [TIE Line] TIE-to-CO Security Mode
Default No
Value Range 1.
No
2.
Yes
Description/Function Specifies whether to restrict the TIE-to-CO call or not.
If set to "Yes," the TIE caller must enter a valid TIE User Code
before making a CO call via this system.
Reference • 3.1 E&M Features (F/G)
– E&M (TIE) Line Service
Parameter [DDI / DID / TIE] Digits to delete
Default 0
Value Range 0-16 digits
Description/Function Specifies the number of digits to be deleted from the number
received from the DDI / DID trunk / other PBX via DID / TIE lines.
Reference • 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
• 3.1 E&M Features (F/G)
– E&M (TIE) Line Service