Panasonic KX-TD500CE Programming Manual Download

Page: 11 / 314

1.3

Trunk Port Assignment

Configuration

Parameter

Group No.

Default

48: E&M card, 1: Others

Value Range

1 - 48

Description/Function

Specifies the trunk group (1-48) to which the trunk port is assigned.

Notes

•

Each trunk port must be assigned to a Trunk Group.
This programme defines the Trunk Group assignment for
each trunk port.

•

In some countries, the E1 and the E&M cards must not be
connected to the Public Switched Network.

Reference

• 1.3 System Features (F/G)

– Trunk Group

• 3.2 Trunk Group (P/G)

Parameter

Status

Default

—

Value Range

INS

OUS

FAULT

Description/Function

Specifies the operating status of the trunk port.

INS: The trunk port is In-Service.

OUS: The trunk port is Out-of-Service.

FAULT: The trunk port is defective.

Reference

None

Summary of Contents for KX-TD500CE



























































































































































































































































































































Search results

Summary of Contents for KX-TD500CE

Reviews:

Related manuals for KX-TD500CE

Brands by name

Popular brands

Panasonic KX-TD500CE, Programming Manual

Search results

Summary of Contents for KX-TD500CE

Reviews:

Related manuals for KX-TD500CE

Brands by name

Popular brands