Panasonic KX-TD500CE, Programming Manual

Page: 37 / 314

2.2 Tenant
System 37
Parameter Automatic Route Selection
Default No check
Value Range 1.
Check [Enable]
2.
No check [Disable]
Description/Function Specifies whether to utilise ARS (Automatic Route Selection) or
not. If set to "No" (No check), "Trunk Access, Idle" is activated
instead of ARS when an extension user dials "9" for making an
outside call.
Reference • 1.6 Originating Features (F/G)
– Automatic Route Selection (ARS)
• 7.1 ARS (Automatic Route Selection) (P/G)
Parameter
System Speed Dial TRS Level Override
Default No check: [SP], [NL], [JT], Check: [G]
Value Range 1.
Check [Enable]
2.
No check [Disable]
Description/Function Enables or disables "Toll Restriction Override for System Speed
Dial Numbers" feature.
If enabled (Check), all extension users in the tenant can make
System Speed Dialling calls without toll restriction.
Reference • 1.6 Originating Features (F/G)
–Toll Restriction Override for System Speed Dialling
Parameter System Speed Dialing Entries Max.
Default Tenant 1:1000, Tenant 2:1000, Tenant 3-8:0
Value Range 0-1000 in 20 codes increments
Description/Function Specifies the maximum number of Speed Dialling codes available
for each tenant.
Note
• Up to 2000 Speed Dialling codes can be shared among tenants
under the restriction of up to 1000 codes per tenant.
Reference • 5.2 System Speed Dialling (P/G)