2.5
System Timer
74
System
Parameter
Timed Reminder Arrive Count
Default
3 times
Value Range
1-5 times
Description/Function
Specifies the number of times (1-5) Timed Reminder / Remote
Timed Reminder (Wake-Up Call) is repeated until the destination
extension answers it.
Reference
• 1.8 Ringing Features (F/G)
– Timed Reminder (Wake-Up Call)
– Timed Reminder, Remote (Wake-Up Call)
• 2.7.1 Setting the Alarm (Timed Reminder (Wake-Up Call)) (U/M)
• 3.1.1 Setting the Alarm for Other Extensions (Remote Timed
Reminder (Wake-Up Call)) (U/M)
Parameter
DISA Automated Attendant Time
Default
1 s
Value Range
1-5 s
Description/Function
Specifies the length of time in seconds the system is to wait before
recognising the first digit as a DISA Automated Attendant number.
If this timer expires before the second digit is dialled, the system
assumes that the first digit is a DISA built-in auto attendant number.
Reference
• 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)
Parameter
DISA IRNA Time
Default
60 s
Value Range
5-240 s
Description/Function
Specifies the length of time in seconds the system is to wait before
activating IRNA (Intercept Routing No Answer) feature for DISA
calls.
If a DISA call directed to a single extension is not answered within
this timer, the system redirects the DISA call to another pre-
programmed IRNA destination.
Note
•
Call Forwarding- No Answer Time will override this timer if an
extension has enabled Call Forwarding- No Answer.
Reference
• 1.5 Attended Features (F/G)
– Direct Inward System Access (DISA)
Summary of Contents for KX-TD500CE
