Panasonic KX-TD500CE, Programming Manual

Page: 262 / 314

10.6 System Parameters
262 Maintenance
[Serial Interface Port] SMDR (Port 2)
Please refer to "Station Message Detail Recording (SMDR)" in Section "1.3 System Features"
of the Features Guide.
Note
• Generally speaking, you should connect your Programming PC to Port 1 and your SMDR
printer to Port 2.
Parameter [Serial Interface Port] PROG – Word Length
Default (Display only)
Value Range 8 bits
Description/Function Defines the number of bits in each byte or character.
Note
• Port 1 is fixed to 8 bits.
Reference None
Parameter [Serial Interface Port] PROG – Stop Bit
Default (Display only)
Value Range 1 bit
Description/Function A stop bit code indicates the end of a bit string which composes a
character. Select an appropriate value depending on the
requirements of your printer or personal computer.
Note
• Port 1 is fixed to 1 bit.
Reference None
Parameter [Serial Interface Port] PROG – Baud Rate
Default 19200 bps
Value Range 1.
2400 bps
2.
4800 bps
3.
9600 bps
4.
19200 bps
Description/Function Specifies the data transmission speed from the system to the printer
or personal computer.
Reference None