Panasonic KX-TD500CE, Programming Manual

Page: 18 / 314

1.5 VPS (DPT) Port Assignment
18 Configuration
Save the data changes by clicking "Apply" button.
Then set "Port Status" to "INS (In-Service)."
Jack No.1 must be assigned, because the port is used as the channel to control the VPS.
5. Synchronisation of the communication between the KX-TD500 System and the TVP.
The KX-TD500 System begins synchronisation with the VPS when the step 4 is done.
The "Power" LED of the VPS begins flashing at the same time. The LED will turn on after the
synchronisation is completed. It takes for about 30 seconds to 1 minute to be able to use the
VPS system. It depends on the VPS model and the port number you set up.
Parameter TVP No.
Default 1
Value Range 1- 8
Description/Function Specifies the device number of a Panasonic Voice Processing
System (VPS), which you are going to programme.
Reference
• 1.3 System Features (F/G)
– Integration, VPS
• 1.2 Slot Assignment (P/G)
Parameter VPS Card
Default
None
Value Range None, XXX : YYY [XXX : Card No. (101-314), YYY : Card Type]
Description/Function Specifies the physical number of DLC / DHLC card to which VPS
is connected as extensions.
Reference • 1.3 System Features (F/G)
– Integration, VPS
• 1.2 Slot Assignment (P/G)