Panasonic KX-TD500CE, Programming Manual

Page: 137 / 314

4.2 Trunk Line
Line 137
Description/Function Specifies how the incoming CO call via this trunk line is routed to
the destination in the system.
1.
DIL
Incoming CO calls are routed by DIL (Direct In Lines) 1:1 or
1:N feature.
2.
DID
Incoming CO calls are routed by DID (Direct Inward Dialling)
feature.
3.
TIE
Incoming CO calls are routed by TIE Line feature.
4.
DDI
Incoming CO calls are routed by ISDN DDI (Direct Dialling In)
feature.
5.
MSN
Incoming CO calls are routed by ISDN MSN (Multiple
Subscriber Number) feature.
<Available selections and the default values per Card Type>
<Default values for E1 card per Channel Type / Receiver
Type>
Notes
• In some cases, the default cannot be changed.
• In some countries, the E1, the E&M and the ELCOT cards
must not be connected to the Public Switched Network.
Parameter Incoming Type
BRI
E1
E&M
ELCOT
PRI30
TIE/DDI/MSN
DIL/DID/TIE
DIL/TIE
DIL
TIE/DDI
Card Type Selection
Default
DDI
DID/TIE
TIE
DIL
DDI
Refer to the
table below.
DR2
E&M-C
E&M-P
Pulse
DTMF
MFC-R2
MFC-R2
Pulse
DTMF
Channel Type Receiver Type
Default
DID
TIE