4.2
Trunk Line
Line
139
Parameter
Destination – Day / Night
Default
1001: [SP], [NL], [JT], 2001: [G]
Value Range
3-4 digits consisting of 0-9
Description/Function
Specifies the destination for the trunk line whose "Incoming Type"
is set to "DIL."
The following numbers can be assigned as the destination:
Extension numbers, FDNs.
(Assignable only when " DIL" is specified in "Incoming Type"
programming.)
Reference
• 1.5 Attended Features (F/G)
– Direct In Lines (DIL)
Parameter
Subscriber
Default
Blank
Value Range
Up to 16 digits consisting of 0-9
Description/Function
Specifies the number which is used as the CLIP / COLP or ANI
(Automatic Number Indication) number.
Reference
None
Parameter
[CPC Signal] OUT Detection
Default
Disable (ELCOT card), Enable (E1 [DR2] card)
Value Range
1.
Enable
2.
Disable
Description/Function
Specifies whether CPC Detection on outgoing CO calls is enabled
or disabled.
If enabled, the system disconnects the line with the time set in
programme "[CPC Signal] OUT Detection - Detection Time" when
the CPC signal is detected.
Note
•
In some countries, the E1 and the ELCOT cards must not be
connected to the Public Switched Network.
Reference
• 1.3 System Features (F/G)
– Calling Party Control (CPC) Signal Detection
Summary of Contents for KX-TD500CE
