4.3
Extension Line
Line
161
<Additional Parameters Required by Key Type>
Depending on a Key Type, additional parameters are required as follows.
Key Type
Additional
Parameters
(default)
Description
SINGLE-CO
Trunk Line No.
Specifies the trunk port physical number (10101 to 31416).
Tone (2)
Specifies the ringer frequency (ring tone type: 1-8) for
incoming calls.
GROUP-CO
Trunk Group No.
Specifies the Trunk Group number (01 - 48).
Tone (2)
Specifies the ringer frequency (ring tone type: 1-8) for
incoming calls.
LOOP-CO
Tone (2)
Specifies the ringer frequency (ring tone type: 1-8) for
incoming calls.
DSS
EXT.
Specifies the extension number ( 3 or 4 digits).
PHANTOM
EXT.
Specifies the phantom extension number ( 3 or 4 digits).
Ringing (Yes)
Specifies whether the extension rings or not when a call to a
phantom button comes in on the extension.
PDN
Tone (2)
Specifies the ringer frequency (ring tone type:1 - 8) for
incoming calls.
Ringing Type
(Immediate)
Specifies the timing of ringing when a call comes in on the
extension: Immediate, 1-ring Delay, 3-ring Delay, 6-ring
Delay, No Ring
SDN
EXT.
Specifies the PDN owner's extension number (3 or 4 digits).
Tone (2)
Specifies the ringer frequency (ring tone type:1 - 8) for
incoming calls.
Ringing Type
(Immediate)
Specifies the timing of ringing when a call comes in on the
extension: Immediate, 1-ring Delay, 3-ring Delay, 6-ring
Delay, No Ring
ONE-TOUCH
Dial
Specifies the telephone number or feature access number (up
to 24 digits consisting of 0 - 9, , #, -, P, S or F).
Note
P: Pause, S: Secret Dialling, F: Hook Flash
VTR
DN
Specifies the Directory Number of the Voice Mail extension.
2WAY-REC
DN
Specifies the Directory Number of the Voice Mail extension.
2WAY-TRN
DN
Specifies the Directory Number of the Voice Mail extension.
Summary of Contents for KX-TD500CE
