manualshive.com logo in svg

Panasonic KX-TD308, Summary Manual

Share
Download
Panasonic KX-TD308 Summary Manual Download Page 92

4.4

Special Display Features

4-188

DPT Features

Station Speed Dialing

System Speed Dialing

Extension Dialing

Second Display

     System Speed

Third Display

     Station Speed 

Forth Display

       Extension

John Smith

→

or

■

KX-T7431

System Speed Dialing / Station Speed
Dialing / Extension Dialing

1. Rotate the Jog Dial until the desired item is

displayed.

2. Press the SELECT button or go off-hook.

Note

• You can lift the handset or press the SP-

PHONE button instead of the SELECT
button.

• Press the MODE button to return to the

initial display.

• For System Speed Dialing and Extension

Dialing, before rotating the Jog Dial, you
can press the corresponding alphabet key
to select the desired letter.
<Example> Press 2 two times to display
“B” items.

Summary of Contents for KX-TD308

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands