manualshive.com logo in svg

Panasonic KX-TD308, Summary Manual

Share
Download
Panasonic KX-TD308 Summary Manual Download Page 15

DPT Features

4-111

4.2

DPT Features

P

Privacy Release

Allows you to establish a three-party conference call while connected to an existing call. 

During a conversation with an outside party, to allow another
extension to join the conversation;

1. Press the corresponding CO button.

• The corresponding CO indicator light flashes green rapidly.

2. Another extension user presses the flashing CO button within 5

seconds.

• You hear a confirmation tone (optional).

• A three-party conference is now established. 

To leave the conference

1. Hang up or press the SP-PHONE button.

• The other two parties may continue their conversation.

To terminate one party and talk to the other

1. Press the CO or INTERCOM button of the desired party.

Conditions

• The CO button pressed to join the conversation must be assigned as a Single-CO (S-

CO) button.

• After the user presses the CO button, the CO indicator light of the other extension

flashes rapidly for only five seconds.  Pressing the CO button again gives you an
additional five seconds.

• This feature overrides “Data Line Security” and “Executive Busy Override Deny”.

• When a two-party call is changed to a three-party call and vice versa, a confirmation

tone is sent to all three parties.  Eliminating the tone is programmable.

Programming References

• Station Programming (Section 2)

Flexible CO Button Assignment — Single-CO (S-CO) Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

• System Programming — Installation Manual

[990] System Additional Information, Field (13)

1

1

CO

INTERCOM

or

CO

1

CO

2

– at your extension

– at the other extension

Summary of Contents for KX-TD308

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands