Panasonic KX-TD308 Summary Manual Download Page 56

Page: 56 / 248

4-152

DPT Features

4.3

Operator / Manager Service Features

Playing back a message

1. Press the MODE button repeatedly until “Feature Access” is

displayed.

• The display shows:

2. Rotate the Jog Dial until “OGM Play” is displayed.

3. Press the SELECT button.

• You hear a confirmation tone.

• The STORE indicator lights.

• The message is played back; the counter starts.

• The display shows:

Time counter (seconds)

4. Press the STORE button or wait until playback is finished.

• The STORE indicator light turns off.

• You hear a confirmation tone and then a dial tone.

5. Hang up or press the SP-PHONE button.

Feature Access

MODE

SELECT

AUTO DIAL

STORE

OGM Rec.:10

Summary of Contents for KX-TD308

























































































































































































































































Search results

Summary of Contents for KX-TD308

Reviews:

Brands by name

Popular brands

Panasonic KX-TD308, Summary Manual

Search results

Summary of Contents for KX-TD308

Reviews:

Brands by name

Popular brands