manualshive.com logo in svg

Panasonic KX-TD308, Summary Manual

Share
Download
Panasonic KX-TD308 Summary Manual Download Page 181

Standard Telephone Features

5-81

5.2

Standard Telephone Features

S

System Speed Dialing

Allows you to make a call using speed dial numbers programmed previously.  This
system supports one hundred speed dial numbers which are available to all extension
users.

1. Lift the handset.

2. Dial .

• You do not hear a tone.

3. Dial the System Speed Dial number (00 through 99).

Conditions

• System Speed Dial numbers must be stored either through User (Manager) or System

Programming.

• “System Speed Dialing” can be followed by manual dialing to supplement the dialed

digits.

• It is possible to cancel toll restriction with this feature (Toll Restriction Override for

System Speed Dialing).  In this case, System Programming is necessary.

Programming References

• User Programming (Section 3) / System Programming (Installation Manual)

[001] System Speed Dialing Number Set

[002] System Speed Dialing Name Set

Feature References

Toll Restriction Override for System Speed Dialing

1

2

3

System Speed Dial number

Summary of Contents for KX-TD308

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands