manualshive.com logo in svg

Panasonic KX-TD308, Summary Manual

Share
Download
Panasonic KX-TD308 Summary Manual Download Page 182

5-82

Standard Telephone Features

T

5.2

Standard Telephone Features

Timed Reminder

You can receive a ringback at your telephone to remind you of a meeting or appointment.
The setting is selectable either for one time or daily (everyday until canceled) at a pre-set
time.

Setting

1. Lift the handset.

2. Dial the feature number (76) and 1.

3. Enter the hour (01 through 12) and minute (00 through 59).

4. Dial 0 to enter AM, or dial 1 to enter PM.

5. Dial 0 for a one time alarm setting*

1

, or dial 1 for a daily alarm

setting*

2

.

*

1

An alarm will be heard at the preset time and then the setting is cleared.

*

2

An alarm will be heard at the preset time daily until the setting is

changed or canceled.

6. Hang up.

Canceling

1. Lift the handset.

2. Dial the feature number (76) and 0.

• You hear a confirmation tone and then a dial tone.

3. Hang up.

1

2

1

2

3

4

hour and minute

or

5

or

6

3

Summary of Contents for KX-TD308

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands