Panasonic KX-TD308 Page 52 Summary Manual Download

Page: 52 / 248

4-148

DPT Features

4.3

Operator / Manager Service Features

Playing back a message

1. Press the Features (F4) button.

2. Press the NEXT (S3) button repeatedly until “OGM Playback”

is displayed.

3. Press the Function button which is next to “OGM Playback”.

• You hear a confirmation tone.

• The STORE indicator lights.

• The message is played back; the counter starts.

• The display shows:

Time counter (seconds)

4. Press the STORE button or wait until playback is finished.

• The STORE indicator light turns off.

• You hear a confirmation tone and then a dial tone.

5. Hang up or press the SP-PHONE button.

Features

S 1

S 2

S 3

OGM Playback

AUTO DIAL

STORE

OGM Rec.:10

Summary of Contents for KX-TD308

























































































































































































































































Search results

Summary of Contents for KX-TD308

Reviews:

Related manuals for KX-TD308

Brands by name

Popular brands

Panasonic KX-TD308, Summary Manual

Search results

Summary of Contents for KX-TD308

Reviews:

Related manuals for KX-TD308

Brands by name

Popular brands