manualshive.com logo in svg

Panasonic KX-TD308, Summary Manual

Share
Download
Panasonic KX-TD308 Summary Manual Download Page 178

5-78

Standard Telephone Features

S

5.2

Standard Telephone Features

Station Feature Clear

Allows you to reset the following station features to the default settings.

a) Absent Message Capability

b) Automatic Callback Busy (Camp-On)

c) Call Forwarding

d) Call Log, Incoming

e) Call Pickup Deny

f) Call Waiting

g) Data Line Security

h) Do Not Disturb (DND)

i) Executive Busy Override Deny

j) Log-In

k) Message Waiting – (All messages will be removed)

l) Pickup Dialing (Hot Line) – (The stored telephone number will be removed)

m) Timed Reminder

Clearing the current feature settings

1. Lift the handset.

2. Dial the feature number (790).

• You hear a confirmation tone and then a dial tone.

3. Hang up.

1

2

3

Summary of Contents for KX-TD308

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands