manualshive.com logo in svg

Panasonic KX-TD308, Summary Manual

Share
Download
Panasonic KX-TD308 Summary Manual Download Page 67

DPT Features

4-163

4.3

Operator / Manager Service Features

5. Enter the hour (01 through 12) and minute (00 through 59).

6. Dial 0 to enter AM, or 1 to enter PM.

7. Dial 0 for one time alarm setting*

1

, or dial 1 for daily alarm

setting*

2

.

• You hear a confirmation tone.

*

1

You hear an alarm ringing at the preset time and then the setting is cleared.

*

2

You hear an alarm ringing at the preset time every day until the setting is

changed or canceled.

8. Hang up or press the SP-PHONE/MONITOR button.

Conditions

• Be sure the system clock is set correctly.

• There is no limit to the number of the extensions who can set the Timed Reminder at

the same time.

• Station Message Detail Recording (SMDR) automatically records the detailed Timed

Reminder information (data, time, extension number, start/no answer).  It is
programmable to print out when the Timed Reminder starts and the alarm is not
answered by System Programming.

Programming References

• System Programming — Installation Manual

[990] System Additional Information, Field (45)

Feature References

Timed Reminder

5

hour and minute

8

6

0

1

or

7

0

1

or

Summary of Contents for KX-TD308

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands