manualshive.com logo in svg

Panasonic KX-TD308, Summary Manual

Share
Download
Panasonic KX-TD308 Summary Manual Download Page 154

5-54

Standard Telephone Features

L

5.2

Standard Telephone Features

Lockout

If one party in a conversation goes on-hook, they are both disconnected from the speech
path automatically.  A reorder tone is sent to the off-hook party before it is disconnected.
No operation is necessary.

Log-In / Log-Out

Allows you to assign the Log-In mode or Log-Out mode within a hunting, ring or UCD
(Uniform Call Distribution) group.  When in the Log-Out mode, you can leave the group
temporarily, preventing hunting calls from being sent to your extension.

Log-In / Log-Out

1. Lift the handset.

2. Dial the feature number (45).

3. Dial 1 or 0.

- 1 : for Log-In mode

- 0 : for Log-Out mode

• You hear a confirmation tone and then a dial tone.

4. Hang up.

Conditions

• The default is “Log-In” mode.

• There should be at least one extension that is in Log-In mode.

Feature References 

Station Hunting (

→

see Installation Manual)

Uniform Call Distribution (UCD)

1

2

4

3

or

Summary of Contents for KX-TD308

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands