Panasonic KX-TD308 Summary Manual Download Page 206

Page: 206 / 248

Quick Reference

6-15

Quick Reference

❐

Message Waiting

Setting

• Off-hook.
• Dial 701 + extension number.
• On-hook.

— If the extension is busy or does not

answer;

• Press MESSAGE button.
— A confirmation tone is audible.
• On-hook.

Canceling

• Off-hook.
• Dial 700 + extension number.
— A confirmation tone is audible.
• On-hook.

Checking and Selecting a message using
the receiver

• Press MESSAGE button repeatedly until

the desired message appears.

Calling back the message sender

• Off-hook.
• Press MESSAGE button, or dial 702.

Clearing all messages using the message
receiver

• Off-hook.
• Dial 700 + your extension number.

❐

Microphone Mute

Setting / Canceling

During a conversation in handsfree mode;

• Press AUTO ANSWER/MUTE button.

❐

Night Service

Confirming the current mode

- Be sure the telephone is idle and on-hook.

• Press #.
— Setting / Canceling should be done by the

operator and manager.

❐

Off-Hook Call Announcement (OHCA)

Setting / Canceling to receive OHCA

• Off-hook.
• Dial 731.
• Dial 2 or 0.

- 2 : to set
- 0 : to cancel

— A confirmation tone is audible.
• On-hook.

Executing

While hearing a busy tone:

• Dial 1.
— A confirmation tone is audible.
• Talk.

❐

Off-Hook Monitor

Setting / Canceling

During a conversation using a handset;

• Press SP-PHONE button.

❐

One-Touch Dialing

• Off-hook.
• Press an One-Touch Dialing button.

❐

Operator Call

• Off-hook.
• Dial 0.

❐

Outward Dialing

— Line Access, Automatic

• Off-hook.
• Dial 9 + phone number.

— Line Access, Individual

• Off-hook.
• Press a CO button, or dial 8 + outside line

number (1 through 3).

• Dial the phone number.

Summary of Contents for KX-TD308

























































































































































































































































Search results

Summary of Contents for KX-TD308

Reviews:

Brands by name

Popular brands

Panasonic KX-TD308, Summary Manual

Search results

Summary of Contents for KX-TD308

Reviews:

Brands by name

Popular brands