manualshive.com logo in svg

Panasonic KX-TD308, Summary Manual

Share
Download
Panasonic KX-TD308 Summary Manual Download Page 47

DPT Features

4-143

4.3

Operator / Manager Service Features

Night Service On / Off

This system supports both the night and day modes of operation.  The system operation
for originating and receiving calls can be different in night and day modes.  Toll
restriction calls can be programmed to prevent unauthorized toll calls at night.  Day/Night
mode can be switched manually at any desired time by the operator or manager.

Display Operation (KX-T7235)

Switching the mode

1. Press the Features (F4) button.

2. Press the NEXT (S3) button repeatedly until “Night On/Off” is

displayed.

3. Press the Function button which is next to “Night On/Off”.

4. Dial 1 or 0.

- 0 : from night mode to day mode

- 1 : from day mode to night mode

• You hear a confirmation tone.

• The display shows:

or

5. Hang up or press the SP-PHONE button.

Display Operation (KX-T7436 / KX-T7433)

Switching the mode

1. Press the SHIFT button repeatedly until S3 button is changed to

“FEAT”.

• The bottom line of the display shows:

• The KX-T7436 user can also press the Feature (F4) button

instead.  In this case, skip step 2.

2. Press the FEAT (S3) button.

1

2

F4

F5

Features

S 1

S 2

S 3

NEXT

3

F

F

Night On/Off (

→

1/0)

4

1

0

or

5

1

2

SHIFT

S 1

S 2

S 3

FEAT

Night Mode

Day Mode

STA  EXT  FEAT

Summary of Contents for KX-TD308

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands