manualshive.com logo in svg

Panasonic KX-TD308, Summary Manual

Share
Download
Panasonic KX-TD308 Summary Manual Download Page 68

4.4

Special Display Features

4-164

DPT Features

With the display telephone, KX-T7230, KX-T7235, KX-T7431, KX-T7433 or KX-
T7436, you can easily access several features.  

The display telephones have the ability to perform the following features.

Feature

Call Forwarding / Do Not Disturb

Call Log, Incoming

Call Log Lock, Incoming

Call Log, Outgoing

Call Directory

Extension Dialing

Station Speed Dialing

System Speed Dialing

System Feature Access Menu

KX-T7230

✔

✔

KX-T7235

✔

✔

✔

✔

✔

✔

✔

✔

KX-T7431

✔

✔

✔

✔

KX-T7433

✔

✔

✔

✔

✔

✔

KX-T7436

✔

✔

✔

✔

✔

✔

✔

✔

“

✔

” indicates the features is available.

Helpful Information about Display Operation

Press CONT (S1) to adjust the display contrast.

Press RING (S2) to adjust the ringer volume.

Press BGM (S3) to turn on/off the BGM.

Press MENU (S1) to return to the initial display.

Press PREV (S2) to return to the previous display.

Press NEXT (S3) to advance to the next display.

Press ACCNT (S3) to enter an account code.

Summary of Contents for KX-TD308

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands