Panasonic KX-TA624 User Manual Download Page 75

Page: 75 / 234

Telephone Features

3-15

3.2

Telephone Features

• A flexible CO button on the KX-T7050 and KX-T7055 (no FWD/DND button

provided) can be assigned as the FWD/DND button.

• The lighting patterns of the FWD/DND button are as follows.

Off:

Both features are not set.

Red: DND mode
Flashing red slowly: FWD mode

• You can check the assignment by pressing the FWD/DND button while on-hook.

Programming Reference

• Station Programming (Section 2)

Flexible Button Assignment — FWD/DND Button

Feature References

Call Forwarding — CANCEL
Do Not Disturb (DND)
Voice Mail Integration for KX-TVS50/KX-TVS75/KX-TVS80/KX-TVS100/KX-TVS110

Call Forwarding — All Calls

You can re-direct all of your calls to another extension.

Setting

PT and SLT

Lift the handset
or press
SP-PHONE/MONITOR.

For a PT: Press FWD/DND.
For an SLT: Dial 71.

Hang up or press
SP-PHONE/MONITOR.

Confirmation
tone and
dial tone

Dial 1. Enter the destination

extension number
(100 through 199).

Dial #.

For an SLT

For a PT

FWD/DND

extension no.

<PT Display Example>

extension number where
the call is to be forwarded

• The FWD/DND indicator light flashes red slowly.
• Single line telephone users can dial “0” instead of “#”.

FWD(All) Extxxx

• You may press the flexible button assigned as

the FWD/DND button instead.

Summary of Contents for KX-TA624











































































































































































































































Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands

Panasonic KX-TA624, User Manual

Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands