Panasonic KX-TA624 User Manual Download

Page: 150 / 234

3-90

Telephone Features

3.2

Telephone Features

Conditions

• The destination numbers are stored through Station Programming.

• You may press a CO button to select a desired outside (CO) line before pressing the

One-Touch Dialing button.

• “Speed Dialing”, “One-Touch Dialing” and manual dialing can be used together.

• You can store a number consisting of twenty-five digits or more by dividing and storing

it into two One-Touch Dialing buttons.

• The telephone number dialed will be displayed on the LCD. Use the FWD/DND (

→

)

or CONF (

←

) button to scroll the display to either side.

• A pause is automatically entered after the stored line access code, 9 or 81 through 86,

when dialing.

• To confirm the current status of the button, press the button while on-hook.

Programming Reference

• Station Programming (Section 2)

Flexible Button Assignment — One-Touch Dialing Button

Feature Reference

Station Programming — One-Touch Dialing Assignment (4.2 DSS Console Features)

One-Touch Dialing

Allows you to call a number or access a system feature with the touch of a button. This is
done by storing an extension number, telephone number or feature number (up to
twenty-four digits) in a One-Touch Dialing button.

Dialing

Lift the handset or press
SP-PHONE/MONITOR.

Press the flexible button assigned
as a One-Touch Dialing button.

Summary of Contents for KX-TA624











































































































































































































































Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands

Panasonic KX-TA624, User Manual

Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands