Panasonic KX-TA624 User Manual Download

Page: 170 / 234

3-110

Telephone Features

3.2

Telephone Features

Conditions

• Up to sixty-four digits can be stored and redialed. This does not include an outside

(CO) line access code.

• “

”, “#”, “PAUSE”, and “INTERCOM” (for secret dialing) are counted as one digit.

• A flexible button can be assigned as the SAVE button.

• You can check the stored number. Press the SAVE button while on-hook, and the stored

number will be displayed.

• You can change the outside (CO) line when dialing. You may press a CO button to

select an outside (CO) line directly after going off-hook before pressing the SAVE
button.

Programming Reference

• Station Programming (Section 2)

Flexible Button Assignment — SAVE Button

Redial, Saved Number

Allows you to save the current external telephone number during a conversation, so that
you can redial the same party later using a simple operation. The saved number can be
redialed until another number is stored.

Storing

SAVE

Press SAVE.

Press AUTO DIAL/STORE.

During a conversation or while hearing a busy tone

AUTO DIAL

STORE

SAVE

Press SAVE.

Lift the handset or press
SP-PHONE/MONITOR.

Dialing

Summary of Contents for KX-TA624











































































































































































































































Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands

Panasonic KX-TA624, User Manual

Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands