Panasonic KX-TA624 User Manual Download

Page: 82 / 234

3-22

Telephone Features

3.2

Telephone Features

Conditions

• If a held call is not retrieved within a pre-determined time (default: 30 seconds), Hold

Alarm/Hold Recall occurs.

• If an outside call is placed on hold and not retrieved within thirty minutes, it will be

automatically disconnected.

• With outside calls, you can put multiple calls on exclusive hold. However, with

intercom calls, you can put only one call on exclusive hold.

Programming Reference

• System Programming — Installation Manual

[200] Hold Recall Time

Feature References

Call Hold
Hold Alarm/Hold Recall (

→

See the Installation Manual.)

Call Hold, Exclusive

Prevents other extension users from retrieving your held call. Only the user who held the
call can retrieve it.

To place a call on exclusive hold

Press HOLD.

HOLD

Press HOLD again.

HOLD

During a conversation

• The CO or INTERCOM indicator light flashes green slowly.
• The current call is placed on hold.

• The CO or INTERCOM indicator light flashes green

moderately.

• The current call is placed on exclusive hold.

Press the CO or INTERCOM
which is on exclusive hold.

INTERCOM

Retrieving a call on exclusive hold

• The CO or INTERCOM indicator light turns steady green.
• The held call is released.

Summary of Contents for KX-TA624











































































































































































































































Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands

Panasonic KX-TA624, User Manual

Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands