Panasonic KX-TA624 User Manual Download

Page: 69 / 234

Telephone Features

3-9

3.2

Telephone Features

Answering, Direct Outside (CO) Line

Allows you to answer an outside call by pressing a CO button. You do not have to lift the
handset or press the SP-PHONE/MONITOR button.

To answer an incoming outside call

Press the CO which is flashing red rapidly.

Conditions

• Specify which line is connected when multiple incoming outside calls arrive at the

same time.

• There are three types of CO buttons: Group-CO (G-CO) button, Other-CO (O-CO)

button and Single-CO (S-CO) button. These can be assigned to flexible CO buttons by
Station Programming.

• This feature is not available for the KX-T7050 and KX-T7055.

Programming References

• Station Programming (Section 2)

Flexible Button Assignment — Group-CO (G-CO) Button,

Other-CO (O-CO) Button,
Single-CO (S-CO) Button

Preferred Line Assignment — Incoming

Feature Reference

Hands-free Operation

• The indicator light turns green and a hands-free conversation is established.

Summary of Contents for KX-TA624











































































































































































































































Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands

Panasonic KX-TA624, User Manual

Search results

Summary of Contents for KX-TA624

Reviews:

Related manuals for KX-TA624

Brands by name

Popular brands