Panasonic KX-TA624, User Manual

Page: 61 / 234

Section 3
Telephone Features
Contents
3.1 Basic Operations ................................................................ 3-2
Making Calls ...................................................................... 3-2
Receiving Calls ................................................................... 3-3
3.2 Telephone Features (A - Z) ............................................... 3-4
3.3 Operator/Manager Service Features
(— for an Operator and Manager only) ........................ 3-127
<Note>
When setting “Idle Line Preference — Outgoing” or “Prime Line
Preference”, you cannot access any PT features after going off-hook.
To access PT features, press the INTERCOM button before or after going
off-hook.
If you use a rotary telephone:
It is not possible to access features which have “
” or “#” in their feature
numbers except for the ones can use “0” instead of “#”.
When the “Pickup Dialing (Hot Line)” feature is set on your single line
telephone, the dialing sequence should be completed within a
pre-determined time (Pickup Dial Waiting Time — default: 3 sec.) after
lifting the handset.
To change the time, refer to System Programming in the Installation
Manual.
Refer to Section 5 “Tone List” for tones.
All PT illustrations used in these operating instructions are based on the
KX-T7130/KX-T7135 model.