Panasonic KX-PNBC8 User Manual Download Page 57

Page: 57 / 141

5.1.2 Step 6:Setting Up the Printer Driver and the Printer Port

on the Client Computer

For Windows 95/Windows 98

Important: Make sure to set the printer settings as shared on the server computer in the

properties window opened by clicking on the Network Neighborhood icon
before you proceed to the following steps. For more information, refer to Help
menu for Windows 95/ Windows 98.

■

If the printer driver is already installed

Setup the printer port.

1. Click Start, move the pointer to Settings, then click Printers.

2. Using the right mouse button, click the printer with the Network Card

installed.

3. Click Properties.

The Panasonic KX-P8415 Properties window is displayed.

4. Click the Details tab.

Summary of Contents for KX-PNBC8














































































































































Search results

Summary of Contents for KX-PNBC8

Reviews:

Related manuals for KX-PNBC8

Brands by name

Popular brands

Panasonic KX-PNBC8, User Manual

Search results

Summary of Contents for KX-PNBC8

Reviews:

Related manuals for KX-PNBC8

Brands by name

Popular brands