125
7.6.2 Changing Print Queues
When you print a file, your system sends the file to a print queue. The print server
assigned to that queue extracts the print job and sends it to the assigned printer. If a
print server is servicing queues on multiple file servers, you must assign queues to the
printer on each file server. To change the print queues, use the following procedures:
1. Start the PCONSOLE utility.
2. Select Print Server Information from the Available Options menu.
3. Select the print server from the list.
4. Select Print Server Configuration from the menu.
5. Select Queues Serviced by Printer from the menu.
6. Select a printer from the Defined Printers list.
7. Press the h key at the File Server/Queue/Priority screen. The
Available Queues list is displayed.
8. Select a queue from the list.
9. Press the ENTER key at the Priority screen to leave the priority
setting at 1.
The highest priority queue is 1; 10 is the lowest. To change the
priority of a queue, press the ENTER key at the File Server/Queue/
Priority screen to display the Priority setting screen. Press the back-
arrow key to delete the current setting. Type a new number from 1 to
10 and press the ENTER key.
Repeat steps 7, 8, and 9 to assign additional queues to the printer.
10. Press the ESC key and save all changes.
