109
7.3.4 NDPS Method (Using UNIX Method)
Perform the following procedures for printing via the server computer (NetWare 5)
from the client computer (Windows 95/Windows 98).
Step 1: Set up the printer settings of the server computer
Step 2: Set up the printer settings of the client computer
Setting Up the printer settings of the server computer (NetWare 5)
Set up the environment that enables the client computer to login to the network in
NDS mode. Make sure that the TCP/IP protocol is already installed on the server
computer.For more information, see your NetWare On Line manual.
The printer settings of the server computer is set via the client computer.
1. Perform step 1 through 31, refer to
“
Setting up the printer settings of
the server computer” on
page 98
.
2. Select Remote Job (IP on LPR) in the Connection Type box then
click Next>.
The configure Port Handler for Printer Agent window is displayed.
3. If the printer is specified by IP address, click on the Host Address
button, then enter the IP address.
If the printer is specified by the host name, click on the Host Name
button, then enter the host name.
