Panasonic KX-NS300, Pc Programming Manual

Page: 281 / 752

Name Description Value Range Links
Subscriber
Number Specifies the number used as
the CLIP number. Max. 16 digits
(consisting of 0–9, *, and
#) Feature Manual
References
4.1.2.2 Calling/Connected
Line Identification
Presentation (CLIP/
COLP)
Ringback
Tone to
Outside
Caller Enables the PBX to send a
ringback tone to an outside
caller when the network cannot
send the tone. Disable, Enable
ISDN
Outgoing
Call Type Selects the method used to
send dialled digits to the
network. En-bloc: The PBX sends
all of the dialled digits at
once after the extension
user completes dialling.
The PBX recognises the
end of dialling when (1) #
is dialled, if programmed,
(2) a pre-programmed
telephone number is
dialled, or (3) the inter-
digit timer expires.
Overlap: The PBX sends
dialled digits one at a
time. PC Programming
Manual References
9.1 PBX Configuration—
[1-1] Configuration—Slot
10.3 PBX Configuration—
[2-3] System—Timers &
Counters—Dial / IRNA /
Recall / Tone—Dial—
Extension Inter-digit (s)
10.9 PBX Configuration—
[2-9] System—System
Options—Option 2—ISDN
en Bloc Dial—[#] as End
of Dial for en Bloc mode
11.1.4 PBX Configuration
—[3-1-4] Group—Trunk
Group—Dialling Plan
Feature Manual
References
4.1.2.1 Integrated
Services Digital Network
(ISDN)—SUMMARY
ISDN
Centrex Enables the use of the
telephone company’s ISDN
Centrex Service features. Disable, Enable Feature Manual
References
4.1.2.1 Integrated
Services Digital Network
(ISDN)—SUMMARY
Networking
Data
Transfer Enables transmission of
extension status data to
connected PBXs in a network.
This setting is only available
when
Port Type on this screen
has been set to QSIG-Slave or
QSIG-Master .
Off, On PC Programming
Manual References
17 PBX Configuration—[9]
Private Network
Feature Manual
References
4.3.5.1 Network Direct
Station Selection (NDSS)
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
PC Programming Manual 281