Panasonic KX-NS300, Pc Programming Manual

Page: 273 / 752

Name Description Value Range Links
ISDN
Outgoing
Call Type Selects the method used to
send dialled digits to the
network. En-bloc: The PBX sends
all of the dialled digits at
once after the extension
user completes dialling.
The PBX recognises the
end of dialling when (1) #
is dialled, if programmed,
(2) a pre-programmed
telephone number is
dialled, or (3) the inter-digit
timer expires.
Overlap: The PBX sends
dialled digits one at a time. PC Programming
Manual References
9.1 PBX Configuration—
[1-1] Configuration—Slot
10.3 PBX Configuration
—[2-3] System—Timers
& Counters—Dial /
IRNA / Recall / Tone—
Dial—Extension Inter-
digit (s)
10.9 PBX Configuration
—[2-9] System—System
Options—Option 2—
ISDN en Bloc Dial—[#]
as End of Dial for en Bloc
mode
11.1.4 PBX Configuration
—[3-1-4] Group—Trunk
Group—Dialling Plan
Feature Manual
References
4.1.2.1 Integrated
Services Digital Network
(ISDN)—SUMMARY
ISDN
Centrex Enables the use of the
telephone company’s ISDN
Centrex Service features. Disable, Enable Feature Manual
References
4.1.2.1 Integrated
Services Digital Network
(ISDN)—SUMMARY
BRI Data
Link (P-MP)
Mode Assigns one or two TEIs
(Terminal Endpoint Identifier)
to the BRI CO port. To use the
ISDN Hold supplementary
service with point-to-multipoint
configuration, this parameter
should be set to
2-link in some
countries/areas.
1-link: One TEI is assigned
to the BRI CO port.
2-link: Two TEIs are
assigned to the BRI CO
port. (Available when
Access Mode on the
Network tab is set to
P-MP .)
Networking
Data
Transfer Enables transmission of
extension status data to
connected PBXs in a network.
This setting is only available
when
Port Type on this screen
has been set to QSIG-Slave or
QSIG-Master .
A maximum of two ports of
each BRI card can be
assigned to transmit extension
status information.
Off, On PC Programming
Manual References
17 PBX Configuration—
[9] Private Network
Feature Manual
References
4.3.5.1 Network Direct
Station Selection (NDSS)
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
PC Programming Manual 273