Panasonic KX-NS300, Pc Programming Manual

Page: 282 / 752

Name Description Value Range Links
Loopback
Test started
by Network Enables a loopback test started
from the network side, to be
performed on the PRI23 card. Disable, Enable
Extension Setting
Extension Setting parameters are applicable only for the PRI extension port.
The
Shelf , Slot , and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot .
Name Description Value Range Links
Port Type Selects the type of the port.
Note
•
Each ISDN connection in a
QSIG network must have a
master port on one PBX and a
slave port on another PBX.
•
ISDN extensions can belong to
an incoming call distribution
group or idle extension hunting
group. In this case, an MSN
can be assigned.
CO: For connecting to public
network
Extension: For connecting to
extension
QSIG-Slave: For connecting to
private network (slave port)
QSIG-Master: For connecting
to private network (master
port)
Connection Indicates the port status. To change
the status of the port, click the
desired cell in the column, and then
select
INS or OUS for the port.
This option is only available in On-line
mode.
INS: The port is in service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
Ring Mode
(ISDN MSN
Last No. 0 or
00) Selects the ring mode when receiving
an incoming call with an MSN ending
with "0" or "00". Ring All Extension for MSN:
Ring all ISDN extensions that
are addressed with MSN.
Ring AN Extension for MSN:
Ring only one of the ISDN
extensions that are addressed
with MSN. Feature
Manual
References
5.2.5.1 ISDN
Extension
Network Configuration
The Shelf , Slot , and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot .
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
282 PC Programming Manual