Panasonic KX-NS300, Pc Programming Manual

Page: 647 / 752

Name Description Value Range Links
Fax
Notification
Mode Determines what action the system takes
when an incoming fax call is successfully
received by the main or alternate fax
extension. The system can announce to the
Fax Manager the number of received fax calls.
The number announced is the number of
received fax calls since the last time the
system notified the Fax Manager. No : The system will not
notify the Fax Manager when
fax calls are answered.
Mbx : The system will
announce the number of
successfully received fax
calls to the Fax Manager
when the Fax Manager logs
in to his or her mailbox.
Ext : The system will
announce the number of
successfully received fax
calls to the Fax Manager by
calling the Fax Manager’s
extension.
Disconnect Parameters
Name Description
Value
Range
Links
Maximum Silence
Time (0-60 s) Specifies the length of silence detected by the system
before the system disconnects the call. 0–60 s
Maximum
Continuous Tone
Time (0-60 s) Specifies the length of time the system waits when a
continuous tone is detected before it disconnects the
call. 0–60 s
Maximum Cyclic
Tone Time (0-60 s) Specifies the length of time the system waits when a
cyclic tone is detected before it disconnects the call. 0–60 s
Maximum Call
Duration (0-60 min) Specifies the maximum duration of calls. If the system
detects no DTMF signals for the specified amount of
time, it terminates the call. Calls will not be terminated
while playing or recording messages. If this setting is set
to "0", calls will not be terminated. 0–60 min
Transfer to Outside
These parameters determine how the system will transfer calls to a trunk via the following features: Call
Transfer Service, Custom Service, Personal Custom Service, Caller ID Callback, Call-through Service.
Name Description Value Range Links
Outside Transfer
Sequence—Call
Transfer to
Outside Sequence
(Up to 16 digits /
[0-9 * # D F R T , ;
N]) Specifies the sequence the
system uses to transfer calls
to trunks. Max. 16 digits consisting of 0–9,
, # and special codes
D : Disconnecting
F : Flash (Recall)
R : Ringback Tone Detection
T : Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N : Telephone Number Dialling
0–9, , # : Dial Code
Feature
Manual
References
3.2.1.7 Call
Transfer to
Outside
24.4 UM Configuration—[5-4] System Parameters—Parameters
PC Programming Manual 647