Panasonic KX-NS300, Pc Programming Manual

Page: 110 / 752

7.4 Utility—Monitor/Trace
7.4.1 Utility—Monitor/Trace—ISDN/QSIG Protocol Trace
This utility collects protocol trace data from the BRI or PRI card, and displays it on the PC.
This option is only available at Installer level in On-line mode, and requires that the target BRI or PRI card
be set to INS status.
Protocol trace data is continually accumulated on ISDN cards, and 3 types of data can be downloaded:
•
Real Time Trace : Pseudo-real-time data is collected through data polling at one-second intervals. The
displayed information is updated beginning when the Start button is clicked.
•
Accumulation Trace : Previously accumulated data is retrieved and displayed.
•
Error Accumulation Trace : Previously accumulated error data is retrieved and displayed. This trace
shows the data snapshot that is taken just before a card resets.
To view trace data
1. From the Shelf-Slot No. drop-down list, select the target slot. Each card will be preceded by the pattern
"X-Y" as follows:
•
X : Shelf number (1-4)
–
1: Main unit
–
2: Expansion Unit1
–
3: Expansion Unit2
–
4: Expansion Unit3
•
Y : Slot number (1-7)
2. From the Trace Data Type drop-down list, select the type of data to view.
3. Click Start .
Trace information will be displayed.
4.
Select an option:
•
Click Capture to save the displayed trace information.
•
Click Clear to clear the screen display.
5. Click Cancel to return to the main screen.
7.4.2 Utility—Monitor/Trace—V-IPGW Protocol Trace
This utility collects trace data of protocol activity from V-IPGW card.
This option is only available at Installer level in On-line mode, and requires that the target V-IPGW card be
set to INS status.
To save trace data to the System Memory
1.
From the Utility menu, select V-IPGW Protocol Trace .
When the progress bar disappears, the protocol trace is complete. The trace data has been saved to
the System Memory (file name: "PRTH323").
To transfer trace data to the PC
1.
Click the File Transfer PBX to PC link to access the file transfer screen.
The list of files will be displayed.
7.4 Utility—Monitor/Trace
110 PC Programming Manual