Panasonic KX-NS300, Pc Programming Manual

Page: 213 / 752

Name Description Value Range Links
IP Codec
Priority—1st,
2nd, 3rd
Specifies the priority of the codecs to be
used.
None is only available for 2nd and
3rd priorities.
G.711A, G.711Mu, G.729A,
None
Packet
Sampling Time
(G.711A)
Specifies the time interval between
measurements (samples) of sound data
during a conversation. The smaller this
number, the higher the quality of the
transmitted sound. 20 ms, 30 ms, 40 ms, 50 ms,
60 ms
Packet
Sampling Time
(G.711Mu)
Specifies the time interval between
measurements (samples) of sound data
during a conversation. The smaller this
number, the higher the quality of the
transmitted sound. 20 ms, 30 ms, 40 ms, 50 ms,
60 ms
Packet
Sampling Time
(G.729A)
Specifies the time interval between
measurements (samples) of sound data
during a conversation. The smaller this
number, the higher the quality of the
transmitted sound. 20 ms, 30 ms, 40 ms, 50 ms,
60 ms
Voice Activity
Detection for G.
711
Enables the use of the Voice Activity
Detection feature for the G.711 codec.
This feature conserves bandwidth by
detecting silent periods during a call and
suppressing the packets of silence from
being sent to the network. Disable, Enable
Inform Annex
B Status (G.
729A)
Specifies whether to inform that Annex B
for the G.729 codec is not supported. Disable, Enable
Note
Annex B expansion
features for the G.729
codec are not supported
by the V-SIPGW card.
However, it is necessary to
inform some carriers of
this fact to avoid having
calls disconnected.
Carriers can be informed
by enabling this feature.
FAX Sending
Method
Specifies the method of transporting the
fax signal. G.711 Inband, T.38
Maximum Bit
Rate
Specifies the maximum bit rate of the fax
signal. No Speed Limit, 2400 bps,
4800 bps, 7200 bps, 9600
bps, 12000 bps, 14400 bps
FAX Detection
Ability
Enables the use of the FAX Detection
Ability feature. This feature enables end-
to-end fax signal relay when the other
party prefers a codec other than G.711.
This feature functions only if the other
party supports G.711. Disable, Enable
9.10 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW
PC Programming Manual 213