Panasonic KX-NS300, Pc Programming Manual

Page: 199 / 752

Name Description Value Range Links
NAT - Voice
(RTP) UDP Port
No.
Specifies the starting port number of the dynamic
ports used for NAT Traversal. 1024–65535
NAT - Keep
Alive Packet
Sending Ability
Specifies whether to send Keep Alive packets in
order to maintain the NAT binding information. This
setting may be compulsory depending on the
network conditions. Disable, Enable
NAT - Keep
Alive Packet Type
Specifies the type of Keep Alive packets to be sent
out. Blank UDP, None
NAT - Keep
Alive Packet
Sending Interval
Specifies the interval time until the next Keep Alive
packet is sent.
Note
This interval must be shorter than the NAT
binding time of the router. The default value is
appropriate in most cases.
1–60 s
NAT - Fixed
Global IP Address
Specifies the global IP address of the router with
NAT enabled. This setting is compulsory if
Fixed IP
Addr. is selected in NAT Traversal .
1.0.0.0–
223.255.255.255
STUN Ability Specifies whether to open a protocol port of the
STUN server to enable STUN feature. Disable, Enable
STUN Client
Port Number
Specifies the port number of the PBX used for
communications with the STUN server. 1–65535
STUN External
Address Detection
Retry Counter
Specifies the number of times that a query is retried
when no response is received from the STUN
server. 0–8
STUN
Resending Interval
Specifies the length of time until a query is retried
when no response is received from the STUN
server. 0–1600 ms
9.8 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-SIPGW
PC Programming Manual 199