Panasonic KX-NS300, Pc Programming Manual

Page: 370 / 752

Name Description Value Range Links
Private Network—
TIE Call by
Extension
Numbering Enables extensions at two PBXs
connected in a network to have
the same leading number. For
example, extension 101 is
registered at PBX 1, and
extension 102 is registered at
PBX 2. Only the Extension
Number Method is supported.
If disabled, different leading
numbers need to be assigned for
extensions at each PBX. Disable, Enable PC Programming
Manual References
17.1 PBX Configuration—
[9-1] Private Network—
TIE Table—Leading
Number
Feature Manual
References
4.3.1 TIE Line Service
Send CLIP of CO
Caller—when call
is transferred to
CO (CLIP of Held
Party) Enables the transfer of related
CLIP information when a party
on hold is transferred. When set
to "Enable", the transfer
destination will receive the
original caller’s CLIP information,
not the information of the
extension that performed the
transfer. Disable, Enable Feature Manual
References
4.1.2.2 Calling/
Connected Line
Identification
Presentation (CLIP/
COLP)
Send CLIP of CO
Caller—when call
is forwarded to
CO Selects whether the CLIP
number of the calling party or the
CLIP number of the forwarding
extension or virtual PS is sent to
the forwarding destination to
identify the origin of a trunk call. Disable: The CLIP
number assigned to
the forwarding
extension or virtual
PS is sent.
Enable: The CLIP
number of the
calling party is sent.
Feature Manual
References
2.2.2.3 Outside
Destinations in Incoming
Call Distribution Group
4.1.2.2 Calling/
Connected Line
Identification
Presentation (CLIP/
COLP)
4.3.6 Network ICD Group
Send CLIP of
Extension Caller
—when call is
forwarded to CO Selects whether the CLIP
number of the calling extension
or the CLIP number of the
forwarding extension or virtual
PS is sent to the forwarding
destination to identify the origin
of a call. Disable: The CLIP
number assigned to
the forwarding
extension or virtual
PS is sent.
Enable: The CLIP
number of the
calling extension is
sent. Feature Manual
References
2.2.2.3 Outside
Destinations in Incoming
Call Distribution Group
4.1.2.2 Calling/
Connected Line
Identification
Presentation (CLIP/
COLP)
4.3.6 Network ICD Group
10.9 PBX Configuration—[2-9] System—System Options
370 PC Programming Manual