Panasonic KX-NS300, Pc Programming Manual

Page: 41 / 752

can be performed (a warning screen will be displayed for the user that is about to override the currently
logged-in user).
•
Users can view only menus and setting items they may access according to their account level. For User
(Administrator) level accounts, the items that can be viewed can be set by the Installer level account. For
details, see
6.8 Tool—Screen Customise .
•
If two logged-in users change the same setting, the change made last will be the effective setting.
•
If a user attempts to log in, but enters an incorrect password three times, the failure is recorded in the
error log of the PBX and the user may not attempt to log in again for a 5-minute period.
2.1.4 Easy Setup Wizard
In the Easy Setup Wizard, you will configure the mandatory settings required for the PBX. When you log in
to Web Maintenance Console for a PBX that is in its initialised, factory default state, the Easy Setup Wizard
for that PBX will launch automatically.
You must log in using the Installer level account name and password.
–
The Installer level account name is "INSTALLER".
–
The default Installer level account password is "1234".
After logging in, the Easy Setup Wizard welcome screen is displayed. Select a language, and then click
Install . Refer to 5.4.1 Easy Setup Wizard in the Installation Manual for detailed and important information
about configuring the PBX using the Easy Setup Wizard.
2.1.5 Card Status
Certain tools, utilities and settings require that the target card be set to out-of-service (OUS) or in-service
(INS) status before the operation is carried out. Where required, this is noted in the description of each item.
Card status changes can be performed only in On-line mode (see
Programming Modes in
1.1.2 Introduction ).
•
"In service" means that the card is installed correctly in the PBX, and is capable of being used normally.
•
"Out of service" means that the card is installed correctly in the PBX, but has been temporarily removed
from use. This allows settings to be modified or software to be upgraded.
•
"Fault" means that the card is not installed in the PBX correctly, or is not functioning correctly. For more
information, see the Installation Manual.
For details about how to change the status of a card, see To change the status (INS/OUS) of a card (On-
line mode only) in 9.1 PBX Configuration—[1-1] Configuration—Slot .
2.1.6 Extension Number Setting
Many screens within the Maintenance Console software allow you to select extensions as part of
programming various features (for example, as members of a group). These screens use a standard
window to make selecting multiple extensions easy, accessed by clicking a button. This section explains
how to use this Extension Number Setting window.
To select multiple extension numbers, select the type of extension to display, highlight the extensions you
wish to add, then click the
Add button. When finished, click OK . Data for the selected extensions will be
added to the first free spaces on the original screen.
2.1.4 Easy Setup Wizard
PC Programming Manual 41