Panasonic KX-NS300, Pc Programming Manual

Page: 167 / 752

Name Description Value Range Links
Maximum Bit
Rate Specifies the maximum bit rate of the fax
signal. No Speed Limit,
2400 bps, 4800
bps, 7200 bps,
9600 bps, 12000
bps, 14400 bps
FAX
Detection
Ability Enables the use of the FAX Detection
Ability feature. Since fax signals using a
codec other than G.711 cannot be
received accurately at the destination,
this feature automatically switches the
codec to G.711 to enable end-to-end fax
signal relay over the network. Disable, Enable PC Programming
Manual
References
9.2.1 PBX
Configuration—[1-1]
Configuration—Slot—
System Property—
Main—V-IPGW–GW
Settings–Option 1—IP
Codec Priority—1st,
2nd, 3rd
DTMF Specifies the method to transport DTMF
tones. Inband, Outband
(RFC2833),
Outband (H.245)
Payload Type Specifies the payload type for DTMF
tones using RFC2833. Programming this
parameter is only necessary if
DTMF is
set to Outband (RFC2833) .
96–127
V-IPGW–GW Settings–Option 3
Name Description Value Range Links
GW Name Specifies the name of the destination
gateway device for programming reference. Max. 20
characters
T38 FAX Max Datagram Specifies the maximum datagram size when
using the T.38 protocol. 272–512
T38 FAX UDPTL Error
Correction – Redundancy Specifies whether to enable the redundancy
feature when using the T.38 protocol. Disable, Enable
T38 FAX UDPTL
Redundancy count for T.30
messages Specifies the redundancy count for T.30
messages when using the T.38 protocol. 0–7
T38 FAX UDPTL
Redundancy count for data Specifies the redundancy count for data
when using the T.38 protocol. 0–3
T38 FAX Rate Management
Method Specifies the rate management method
when using the T.38 protocol. Transferred TCF,
Local TCF
V-IPGW–DN2IP
Name Description Value Range Links
Leading Number Specifies the leading digits in dialled numbers by which
to associate calls with the appropriate destination. Max. 30 digits
(consisting of 0–9)
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
PC Programming Manual 167